How To Use Balloon Tie Tool? Step By Step Guide

-

Being a party organizer, you must know how to use balloon tie tool! Tying balloons by using our fingers is one of the most painful tasks. Fortunately, the balloon tying tool makes tying balloons easier and painless without hurting your fingers. In today’s post, I will teach you how to use balloon tie tool in detail. The tool can be used in two ways; first by absorbing the tension of the stretched balloon during the knot tying process. The second includes sealing the balloon without tying it. Let’s now grab the balloon tying device and learn how to use balloon tie tool to seal the balloons!

How To Use Balloon Tie Tool?

In this section, I will tell you how to use balloon tie tool in detail. If you have long nails, then sealing a balloon by using a balloon tie tool can be useful. You’ll find various balloon tying tools and accessories in online and offline stores.

Follow these steps to know how to use balloon tie tool to tie a balloon.

  1. First, inflate a balloon by using an electric balloon pump or a manual balloon inflator.
  2. You can even use your mouth to inflate them.
  3. Now, make sure you inflate the balloon to about 6 inches.
  4. You can even use a balloon sizing tool to ensure that you’ve got the right amount of air in the balloon.
  5. Then, place the balloon tying tool in your opposite hand (left, if you’re using your right hand).
  6. Use your index and middle finger to insert the device into your fingers.
  7. Keep the tool pointing out from the palm of your hand.
  8. Next, keep the hollow side facing your fingers.
  9. Now, grip the balloon and place it right beside the balloon tying tool.
  10. Then, stretch the mouth of the balloon till it is about six inches long.
  11. And place it over the top of the balloon tying tool.
  12. Make a loop by wrapping your balloon around the tying tool.
  13. You can also use your thumb to keep the balloon in place.
  14. Lastly, pass the mouth of the balloon under the stretched balloon neck from back to front.
  15. Pull the knotted balloon towards yourself and opposite to the balloon tie tool.

Thus, you’ve now successfully tied a balloon using the balloon tying tool. You can repeat the same procedure to tie multiple inflated balloons in a short time!

Steps To Use A Water Balloon Tie Tool

In summers, we all are obsessed with water balloons. With the help of a water balloon tie tool, you can easily tie water balloons. Follow these steps if you want to know how to use a water balloon tie tool in detail.

  1. First, inflate the balloon by filling it with water.
  2. Now, hold the water balloon tying tool in your other hand.
  3. Then, stretch the mouth of the water balloon a bit.
  4. And place it over the top of the balloon tying tool.
  5. Make a loop by wrapping your balloon around the tying tool.
  6. You can also use your thumb to keep the balloon in place.
  7. Lastly, pass the mouth of the balloon under the stretched balloon neck from back to front.
  8. Pull the knotted balloon towards yourself and opposite to the balloon tie tool.

The water balloon tying tool looks similar to a pen or pencil. You can even use a plunger with a tie-not to fill the balloon with water.

You can keep on reading to know more about how to use the balloon tie tool.

Use A Balloon Tie Tool To Tie Balloons To Ribbon

Sometimes, the client demands to tie ribbons to the neck of the balloons. You can follow these steps if you want to know how to use a balloon tying tool to tie balloons to ribbons.

  1. First, inflate a balloon by using an electric balloon pump or a manual balloon inflator.
  2. Now, make sure you inflate the balloon to about 6 inches.
  3. Using a balloon sizing tool, ensure that you’ve got the right amount of air in the balloon.
  4. Then, place the balloon tying tool in your opposite hand.
  5. Use your index and middle finger to insert the device into your fingers.
  6. Keep the tool pointing out from the palm of your hand.
  7. Next, keep the hollow side facing your fingers.
  8. Now, grip the balloon and place it right beside the balloon tying tool.
  9. Then, stretch the mouth of the balloon till it is about six inches long.
  10. And place it over the top of the balloon tying tool.
  11. Insert one end of the ribbon or string between the slit of the balloon tying tool.
  12. Take out the other end of the ribbon from behind the secured balloon neck.
  13. Now, remove the secured balloon mouth from the tying tool.
  14. Make a loop by wrapping your balloon around the tying tool.
  15. Lastly, pass the mouth of the balloon under the stretched balloon neck from back to front.

During this process make sure the ribbon doesn’t fall out. You can either cut the ribbon or keep using it to tie other balloons on the same line.

You can keep on reading to know how to tie a balloon.

Steps To Tie Balloons Using Pliers

If you have a sore finger, do you know how to tie balloons without using your fingers? You can use a pair of pliers in this case. Follow these steps to use this DIY balloon tie tool.

  1. First, inflate a balloon by using an electric balloon pump or a manual balloon inflator.
  2. Grab a pair of pliers with your other hand.
  3. Now, wrap the mouth of the balloon around the pliers.
  4. Then, open the mouth of the plier.
  5. Pass the end of the mouth of the inflated balloon through the hole.
  6. Pull the knotted balloon towards yourself and opposite the pliers.

You can even use a fork to tie the balloons as an alternative to tying balloons.

Find out more information on interesting topics like these on Uzzers

FAQ

How Do You Tie A Balloon Without Hurting Your Fingers?

Here’s how it works.

  1. Place blown up balloon between knees.
  2. Wrap the end around the fork.
  3. Pull the end through the hole with a crochet hook.
  4. Pull knotted balloon off the fork.

How Do You Tie Balloons Together With String?

Have the piece of string or ribbon ready, blow up a balloon and hold the tail shut. Run the string next to the tail and wrap both around two fingers. Let go of the string and pull the tip of the balloon tail through. Tighten the string and you have a tied balloon.

What Is The Best Way To Tie A Balloon?

To tie a balloon, blow up your balloon, pinch the bottom of the neck with one hand, and use the other hand to stretch out the balloon’s neck a few times. Then, pull the lip of the balloon toward you with your non-pinching hand.

Is There A Device To Tie Balloons?

EZ Tie is a very easy to use balloon tying tool that can be used to tie balloons in just five easy steps. It is a versatile tool that can also be used to tie balloons with ribbons.

Conclusion

In the above post, I’ve explained how to use balloon tie tool in detail. Tying a huge quantity of balloons can be a tricky task when you are in a hurry. Your fingers can go numb during this balloon tying process. With the help of a balloon tie tool, you can easily tie multiple inflated balloons by consuming less amount of time. You can find several balloon tie tools on an amazon website. Simply place the mouth of the inflated balloon over the top of the tool and make a loop. By understanding how to use balloon tie tool, you can tightly seal your balloon with or without ribbons.

 

To Know Some Great Stuff Do Visit CrazzyCricket

To Know Some Great Stuff Do Visit CricFor

To Know Some Great Stuff Do Visit EagerClub

To Know Some Great Stuff Do Visit EarthCycle

To Know Some Great Stuff Do Visit EkSankalpJob

Related Stories